fits make: Mazda. year: 2007.

( Manufacturer Part Number: L3G211400 ), ( Part Type: Balancer Crankshaft ), ( Conditions Options: Quality Recycled Oem Part ), ( Genuine Oem: Yes ), ( Designation: Used ), ( Stock : 7t0331 )
B parts have more than 15,000 miles per year of age. Remote reservoirs and brackets will not be included power steering gear: includes Pittman arm rack pinion: tie rods but they are covered under warranty radio: pay special attention to our fitment.
I only see photos of the vehicle and not actual part you are selling.
Please if you are unsure.
These wheels are still guaranteed to be straight and true, just not the best looking. Best way is to match manufacturer paint code. All lubricants and fluids used must be of the type recommended by manufacturer receipts for installation items accompany claim warranty.
It will have high miles or minor damage.
All claims for warranty must be made within this time. Grading of parts very subjective process but our best keep uniform.
Hid headlights include the bulbs and ballast hub: includes wheel studs ignition coils: see part notes interior rear view mirror: does not included bracket glued to windshield jack.
Parts installed in vehicles used for commercial, racing, or off-road purposes, any purpose other than the original application.
B parts have average miles and condition for its age.
New fluids, filters, seal, and gaskets must be used in the installation of driveling component. Manual transmissions do not include any part of the clutch system. Fuel injectors: see our part notes filler door: includes hinge.
A parts have less than 60,000 miles or 15,000 per year. It is in average condition for the year and mileage of donor vehicle. If you don't know what a paint code is or where yours located, please feel free to ask.
Most of the time we include paint code in our part notes. This is on a case by basis.
This is still a fairly nice looking, used wheel c condition, c-cond will have very noticeable cosmetic issues. Many newer transmissions require a relearn programming procedure.
Claims that result from accident, abuse, neglect, alteration, improper maintenance, or installation. This for a used oem harmonic balancer crankshaft pulley assembly pulled from 2007 Mazda 6 with actual miles on it. The fitment information can be confusing if you don't buy replacement parts everyday. Slides are not covered under warranty column switch: includes wiring if applicable up to the first point it can be unplugged control arm: ball joint and any bushings coolant overflow bottle: cap is included cowl vent panel: see our part notes, often sold as one side only differential carrier: does include axles door trim handle armrest.
It may have minor scratches and clear coat peeling. Is the right part. Common question that we get.
Any brackets are not included axle CV shaft: does include the nut blower motor: squirrel cage fan blade caliper: includes bracket and slides. Defective driveling components must be made available for inspection by AAA or a representative of while still installed in the vehicle purpose analysis before warranty coverage will considered. B condition, b-cond this wheel will have some cosmetic imperfections.
Speed6 whats included. If noted as assembly, it will include the lug wrench mass airflow sensor: does not housing unless pictured power steering pump: includes pulley and attached reservoir.
Claims that result from the failure of other components.
Claims that result from overheating due to cooling system failure.
It will have very minor imperfections but be in better condition than 90 of vehicles on the road. These parts are not covered under warranty: intake manifold, fuel injectors, oil pan, sensors, water pump included: throttle body, turbo, wiring harness exhaust manifold may be left on in certain cases manifold: does include turbo where applicable fan assembly: includes motors, shroud, and blades.
Pay special attention to any options listed.